Digital Repository for faculty of Engineering

Cardiovascular disease (CVD) is a major cause of mortality and the main cause of morbidity worldwide. CVD may lead to heart attacks and strokes and most of these are caused by atherosclerosis; this is a medical condition in which the arteries become narrowed and hardened due to an excessive build-up of plaque on the inner artery wall. Arterial calcification and, in particular, abdominal aortic calcification (AAC) is a manifestation of atherosclerosis and a prognostic indicator of CVD. In this paper, a two-stage automatic method to detect and quantify the severity of AAC is described; it is based on the analysis of lateral vertebral fracture assessment (VFA) images. These images were obtained on a dual energy x-ray absorptiometry (DXA) scanner used in single energy mode. First, an active appearance model was used to segment the lumbar vertebrae L1-L4 and the aorta on VFA images; the segmentation of the aorta was based on its position with respect to the vertebrae. In the second stage, feature vectors representing calcified regions in the aorta were extracted to quantify the severity of AAC. The presence and severity of AAC was also determined using an established visual scoring system (AC24). The abdominal aorta was divided into four parts immediately anterior to each vertebra, and the severity of calcification in the anterior and posterior walls was graded separately for each part on a 0-3 scale. The results were summed to give a composite severity score ranging from 0 to 24. This severity score was classified as follows: mild AAC (score 0-4), moderate AAC (score 5-12) and severe AAC (score 12-24). Two classification algorithms (k-nearest neighbour and support vector machine) were trained and tested to assign the automatically extracted feature vectors into the three classes. There was good agreement between the automatic and visual AC24 methods and the accuracy of the automated technique relative to visual classification indicated that it is capable of identifying and quantifying AAC over a range of severity. arabic 30 English 163
Karima Mohamed Ali Elmasri, William Evans, Yulia Hicks(1-2016)

The huge volume of Naturally Occurring Radioactive Materials (NORM) wastes produced annually by the oil and gas industry in Libya deserves the attention of the national environmental protection authority, radioactive waste management and regulatory bodies. An investigation was carried out to find out the concentration of (NORMs) in evaporation ponds sludge in south eastern oilfield (A/100) of Libya. Twenty soil samples were collected from five evaporation ponds sludge. Activity concentrations of 226Ra, 232Th and 40K in soil generated during oil production operations were determined using a gamma spectroscopy system based on High Purity Germanium (HPGe) detector. Concentrations ranged from 83 to 1000 Bq kg–1 for 226Ra, 59 to 315 Bq kg–1 for 232Th and 109 to 304 Bq kg–1 for 40K. To evaluate the radiological effects, radium equivalent activity and external hazard are calculated. The magnitude of these results demonstrates the need of screening oil residues for their radionuclide content in order to decide about possibility of minimize the environmental impact of NORM and their final disposal. Disposal of NORM waste has to be in accordance with national regulations, environmental policy and international agreements and conventions. The researchers recommend limits for clearance and disposal, based on best international practice. arabic 18 English 82
Usama Elghawi (1-2021)

The 6MV photon beam production by the Elekta Line accelerateur of Tripoli of medical center (TMC) was modeled using Beamnrc and Dosexyzne Monte Carlo codes. The Beamnrc code was used to model the accelerator head and generate phase files. The phase space files were then used as input to the Dosexyzne code to simulate octogenarian deth dose and beam profiles. simulation were first stared using nominal provided by the vendor, a field size of 10x10cm2 and Source to surface distance (SSD) of 100 cm. simulation were compared with experimental data and energy tuning procedures were applied to validate the model. Energy tuning procedures indicated that the nominal energy of 6 MV and a FWHM of the Gaussian distribution of the source of 0.35 cm were the optimal energy and FWHM for the model. The depth of maximum dose at 6 MV was found to be 1.5 cm. The percentage relative differences between calculated and experimental Pdd(s) ranged from 0.5% to 3% for field size of 10cm2 and reached a value of 8% at depths greater than 20cm, The model was later used to calculate PDD(s) and beam profile and output factors for different field size ranging from 3x3cm2 to 25x25cm2. Calculated output factors were in good agreement with experimental values (the percentage relative differences ranged from 1% to 4%). (Author) arabic 42 English 152
Karima Elmasri, Tawfik Giaddui(12-2012)

A performance evaluation of sound recognition techniques in recognizing some spoken Arabic words, namely digits from zero to nine, is proposed. One of the main characteristics of all Arabic digits is polysyllabic words except for zero. The performance analysis is based on different features of phonetic isolated Arabic digits. The main aim of this paper is to compare, analyze, and discuss the outcomes of spoken Arabic digits recognition systems based on three recognition features: the Yule-Walker spectrum features, the Walsh spectrum features, and the Mel frequency Cepstral coefficients (MFCC) features. The MFCC based recognition system achieves the best average correct recognition. On the other hand, the Yule-Walker based recognition system achieves the worst average correct recognition. arabic 7 English 60
A. Ganoun, I. Almerhag(6-2012)

This document presents recommended methods and procedures for measuring, mixing, transporting, and placing heavyweight concretes that are used principally for radiation shielding in nuclear construction. Also covered are recommendations on cement, heavy- weight aggregates, water, and admixtures. Mixture proportioning of heavyweight concrete is discussed. Mixing equipment, form construction, placing procedures, and methods of consolidation are described. Quality control, inspection, and testing are empha- sized, and a list of references is included. Preplaced heavyweight concrete is not discussed in this version of 304.3R. It is covered in the 2004 version of the document.
Hakim S. Abdelgader (12-2020)

Free space optical (FSO) communication is a promising solution to deliver the last mile communication and to guarantee a high data rate. However, the performance of FSO links can be significantly degraded by adverse weather conditions. Recently, machine learning algorithms (MLAs) have emerged for robust prediction to optimize the network performance. In this work, the Quality factor (Q) of FSO systems is estimated by means of four MLA models, namely, multi-linear regression, support vector regression, decision tree regression, and random forest regression. The synthetic data is used for training and testing these MLAs models, and several atmosphere conditions are considered with multiple transceivers FSO link system. The results of decision tree and random forest models demonstrated high coefficient of determination (R 2 ) and low mean square error (MSE) as compared to the other models.
Amal A. Algedir, Taissir Y. Elganimi(10-2020)

A multi-relay cooperative diversity protocol based on the concept of Generalized Spatial Modulation (GSM) scheme is proposed in this paper, assuming that decode-and-forward relaying protocol is adopted at relays. This scheme is referred to as Distributed Generalized Spatial Modulation (DGSM) with activating more than one relay. The system performance of the proposed diversity protocol in terms of the Symbol Error Rate (SER) is evaluated and compared to the performance of GSM and Distributed Spatial Modulation (DSM) schemes. Simulation results show that DGSM systems with activating more than one relay perform almost the same as DSM systems for the same spectral efficiency. It is also demonstrated that a performance enhancement of about 3 dB is achieved over GSM schemes for the same modulation order, which increases the energy efficiency and the reachability using the proposed model. Therefore, the proposed scheme can be effectively used in various 5G wireless networks.
Taissir Y. Elganimi, Fatima I. Alwerfly, Akram A. Marseet(10-2020)

Multiple Input Multiple Output (MIMO) systems with limited Radio Frequency (RF) chains play a pivotal role in the Fifth Generation (5G) of wireless networks. However, the transmitter of Generalized Spatial Modulation MIMO (GSM-MIMO) systems that characterized by a single RF chain and multiple active antennas is capable of reducing both the energy consumption and the transmitter cost. In this paper, combining GSM-MIMO systems with the fully digital Geometric Mean Decomposition (GMD)-based precoding scheme and Analog Beamforming (ABF) into Hybrid Beamforming (HBF) regime is presented for Millimeter-wave (mmWave) massive MIMO systems which is a key enabler for 5G networks. In addition, applying the norm-based user selection algorithm in GSM-MIMO scheme with GMD-based hybrid precoding is proposed, and referred to as Multiuser Steered GSM-MIMO (MUS-GSM-MIMO) scheme. Simulation results demonstrate that the proposed schemes are capable of achieving considerable performance gains over the conventional GSM-MIMO schemes, while avoiding the overwhelming costs of multiple RF chains. Therefore, the proposed schemes are very efficient and highly suitable for large-scale and 5G wireless networks.
Taissir Y. Elganimi, Amani A. Aturki(9-2020)